– loop complete (DSV, loop ADV/Dil adapter, O2 loop adapter, LP hoses with check
valves);
– outer bag (casing);
– outer bag to counterlung connectors (outer nuts and outer color tagged silicone
washers);
– inner counterlung connectors and inhalation (3D cube) and exhalation (L-shaped)
counterlungs;
– OPV/dump valve;
– scrubber canister complete;
– bayonet sensor module assembly and 3 cell harness;
– 1 AK/4 cable/connector for diving computer;
– inner metal plate for scrubber canister attachment;
– velcro bands for attaching scrubber canister to the inner plate;
– O2 1st stage regulator, OPV, swiveling HP “T” fitting and button HP gauge (option to
install AI transmitter), 90º LP adapter and hose;
– gas control block – dual button O2 MAV and O2 needle valve (NV), swiveling gas
outlet LP fitting and LP hose to the CCR;
– notice – it has 2 solid state sensors only;
Advantage: no need to re-calibrate computers – initial, one time, computer
calibration for life time (unless replaced);
– outer O2 cylinder attachment metal plate;
– outer velcro bands for attaching O2 bottle;
– O2 cells calibration kit;
Upgrades available for “Technical/Recreational” configuration (professional installation required):
– ADV/Dil adaptor’s gas isolator switch – $137;
– 2nd harness with AK/4 computer cable – $242;
– 1 or 2 analog cells (requires periodic validation/calibration due to chemical cells’
degradation as time goes by) – $89 each;
– Gas block diluent “out” to ADV to Wing/Drysuit dual manifold kit – $180;
Note: purchasing those all upgrades effectively turns the unit in “TEG” config thus allowing training/diving to all advanced levels
